Starlink.com/Activate: Complete Guide to Activate Your Starlink Service (2026)

 When my Starlink kit arrived, I wanted to get the service activated as quickly as possible. I connected the hardware, opened the Starlink app, and followed the activation instructions. The process was straightforward once I had the Starlink identifier from the kit. Starlink currently recommends using the Starlink app for activation, while Starlink.com/Activate provides an online activation option.

Steps to Activate Your Starlink Service

1. Set Up Your Starlink Kit – Connect the Starlink hardware and router according to the installation instructions. Make sure the equipment has power.
2. Connect to the Starlink Network – On your phone or another device, connect to the Wi-Fi network created by your Starlink router. The Starlink installation guide recommends using the Starlink app to continue setup.
3. Open the Starlink App – Download and open the official Starlink app. You can also choose the online activation option when available.
4. Visit Starlink.com/Activate – Open Starlink.com/Activate in your browser if you're completing activation online.
5. Enter Your Starlink Identifier – Enter the identifier requested on the activation page. Starlink says the kit ID can be found on the Starlink box and may begin with KIT.
6. Add Your Contact Information – Follow the prompts to provide the requested contact information for your Starlink account.
7. Enter Your Service Address – Provide the location where you intend to use the Starlink service. Starlink notes that the country selected for your account should match the country where the kit will be used.
8. Choose a Service Plan – Select an available Starlink service plan for your location. Plan availability can depend on network capacity and your location.
9. Add Your Payment Method – Enter the requested payment information and review the service details before continuing.
10. Complete Activation – Review your information and select Place Order or the applicable confirmation option to activate the service. Starlink says service activation occurs during setup or automatically after seven days.

Final Thoughts

From my experience, Starlink activation is easiest when the kit is already connected and the Starlink identifier is ready. You can use the Starlink app or Starlink.com/Activate to complete the process, select an available plan, and add your payment information. If you purchased your kit from a retailer or third party, make sure it was obtained through an authorized source because Starlink says hardware from unauthorized retailers cannot be activated.